200 kV multiplier

Something I’ve crafted for the new X-ray experiments: a half wave, eight stage Cockroft Walton multiplier (or a Villard cascade, whichever name you like), submerged in oil, providing a theoretical maximum output voltage in excess of 220 kV with a maximum supply voltage of 10 kV AC, with headroom.… [more]

Dual ignition coil driver

Apart from flyback transformers or MOTs, automotive ignition coils are also used as high voltage sources by many enthusiasts. Especially those classic cylinder-shaped ones, used in carbureted engines pre-1990, since these were driven directly from the battery (through contact breakers)… [more]

Flyback driver #2: NE555 quasi-resonant

This single transistor flyback driver topology was created in response to achieve higher efficiency and higher output voltages from ordinary CRT television flybacks (diode split flybacks), for experiments such as x-rays or ionic lifters, without having to make any external HV multipliers. Since these flybacks are normally sealed in epoxy and can withstand an output voltage … [more]

Flyback driver #3: ZVS

The ZVS flyback driver, made popular by Vladimiro Mazzilli, is one of the most efficient and powerful flyback drivers used by high voltage hobbyists from all over the world. The main advantages of this driver are simplicity of the circuit itself, very high efficiency and easily obtainable parts. By tuning it properly you are able to get insane power outputs; beefy flyback transformers… [more]

Small Vacuum tube Tesla coil (VTTC)

To go along with flyback drivers, X-rays and other high voltage stuff, I have decided to build myself a Tesla coil. Because I live in an apartment building though, there would be no place to accommodate and run monstrous coil designs, not mentioning interference, so that is the reason why I’ve opted for small and sweet portable setups like this one is.… [more]

X-rays with a 6VS-1 (6ВС-1)

In 2010, me having already exploited the DY86, a Czech experimenter nicknamed “DANYK” came up with an oddball Soviet vacuum stabilisator tetrode “6VS-1”, which produced copious amounts of X-rays in hot-cathode mode. He got pretty good radiographs, nevertheless. So, I have got an inspiration and obtained a few:… [more]

X-rays with a Beryllium-window tube

While lurking on eBay on a nice spring day of 2012,  I have been lucky to obtain a real gem, for a very cheap price indeed: a special micro-focus X-ray tube, with a Be window on the beam port, mostly for spectral analysis or fluoroscopic scanning purposes, for up to 150 kilovolts with forced oil cooling at high powers; made by a now-defunct American EG&G Astrophysics company… [more]

X-rays with a dental Chirana

After receiving a donation of two nice X-ray intensifying screens from Mr. Máca, a Czech radiologist (many thanks!) in 2011, it wasn’t long before I got a hand on a real X-ray tube, obtained through barter trade, with some luck, too. Only then were my previous failed X-ray attempts with DY86‘s and 6VS-1‘s marked with success, at least!… [more]

X-rays with a DY86

The DY86 (DY87, DY802) vacuum rectifier was used in most European black and white tube television sets. In hot-cathode mode, it was capable of rectifying up to 18 kilovolts at 0.5 mA. In cold-cathode mode, however, it withstands 40 kilovolts DC inverse for a short time, while providing some soft X-ray radiation enough to set classic Geiger counters off.… [more]