As a kid in 1998, I was given an old IBM PS/2 to play games on. It only had one problem: with no USB (naturally) and no optical drive in it, I could not add more games to the hard drive, since the floppy drive didn’t work properly. However, I was curious to see an orange light come on, instead of the more familiar green, and there was “2.88” written on its eject button. What… [more]
This is a follow-up to my previous article about connecting old 8″ drives directly to a PC equipped with a classic floppy disk controller. Since there is a way on how to do it on a hardware level without paid or proprietary equipment, there still needs to be a free and available software solution that enables the OS to interface these drives, as they were not officially supported… [more]
About a year ago I made a small project to see if I could make an old floppy controller chip, salvaged from a PC card, talk to an Arduino Mega board that I had left over from a 3D printer setup. With that being a success, I’ve extended the project to include 8-inch drives and 2.88MB PS/2 diskettes. One last step before I run out of RAM is to include ImageDisk support!… [more]
I have once stumbled upon an interesting article from 2018 published on retrocmp.de, discussing about provisions on connecting an 8″ floppy disk drive to a PC. You know, those huge “boat anchors” that accept flexible disks just four inches shy of an LP record, in exchange of a couple of hundred kilobytes data storage. That sort of type.… [more]